How Do I Stop My APC From Beeping?

How do I reset my APC battery backup?

Follow this easy procedure to brain dead the Back-UPS:Disconnect any attached load.

( …

Unplug the UPS from the wall socket.Disconnect the UPS’ internal battery.

( …

Push and hold the “On” button on the UPS for 5 seconds (you might hear a click, chirp or lights will blink)Reconnect internal battery.More items…•Jan 24, 2012.

How long do APC battery backups last?

roughly 5 yearsIn regard to replacement intervals, there is not an official policy, however VRLA batteries like the ones used inside your APC UPSs last 3-5 years under recommended conditions; and a good rule of thumb for an APC Back-UPS is roughly 5 years or when the unit requires a second battery replacement.

How do I get my battery backup to stop beeping?

How to Make a Battery Backup Stop Beepinguninterruptible power supply. Verify that the computer is plugged in and is receiving power. … uninterruptible power supply. Press the test button on the panel to verify that the computer can run for several minutes on battery power. … Unplug nearby outlets. … Voltmeter. … Don’t plug in your monitor to the UPS.

Why does my APC keep beeping?

If you’ve lost power, it’s beeping to let you know that the battery is in use, and that you should save your work and shut down your computer. A constant beep (every second or two, and never stopping) generally means the UPS is very low on battery power, and you should shut down immediately.

How do I stop my mecer from beeping?

 Mute the alarm: When the UPS is on battery mode, press and hold this button for at least 5 seconds to disable or enable the alarm system.

Should UPS be turned off?

A line-interactive UPS doesn’t have much of its internal parts on when the input power is normal and the batteries are fully charged — it’s just keeping the batteries charged. I recommend turning off the UPS power button but keeping it plugged in to maintain the charge.

How do you use ViewPower?

To launch the GUI, double click the plug icon or choose “Open Monitor” by clicking right button of the mouse. Refer to below diagram. Or, use the Start Menu method; Start>>All Programs >> ViewPower Pro >> ViewPower Pro. Click “Stop Monitor” to stop monitoring application.

How do I get my ups to stop beeping?

Now, to stop the UPS beeping sound, find the “Control” icon in the left column. Another confirmation box will appear, asking you “Toggle Beep?”. Choose yes. Then the UPS will stop beeping.

Can you use APC UPS without battery?

Yes. The outlets will operate without any battery backup protection. Surge protection will continue to function normally. If your model has a display screen, there is a button on the front panel that can be used to mute the alarm.

Why my ups is making noise?

When the UPS is working on battery, it produces lot of heat because of Transistors or MOSFETs. To reduce the heat generated the built in fan runs at high speed. This creates buzzing sound. Also some times when the transformer used is loosely fitted, it produces high frequency sound.